The Ather 450X is a leading electric scooter in the market, known for its cutting-edge technology, efficient performance, and eco-friendly design. Like any advanced vehicle, the Ather 450X may occasionally require a restart to resolve minor issues or refresh the system. This guide will provide you with a detailed, step-by-step process to restart your Ather 450X, ensuring that your scooter remains in optimal condition.
Preparing for the Restart
Before you restart your Ather 450X, make sure you have completed the following preparations:
- Battery Level: Ensure your scooter has a sufficient battery charge, preferably above 50%, to avoid any interruptions during the restart process.
- Safe Environment: Perform the restart in a safe, stable environment, preferably when the scooter is parked.
Step-by-Step Guide to Restarting Ather 450X
Here is the detailed process to restart your Ather 450X:
Step 1: Turn Off the Scooter
- Power Down: Press and hold the power button until the scooter turns off completely. Wait until all lights and indicators are off.
- Wait: Allow the scooter to remain off for about 10-15 seconds to ensure it has fully powered down.
Step 2: Perform a Soft Reset
A soft reset can often resolve minor software issues without the need for a complete restart. Here’s how to perform a soft reset on the Ather 450X:
- Press the Brake Levers: Simultaneously press and hold both brake levers.
- Hold the Power Button: While holding the brake levers, press and hold the power button for about 5-7 seconds.
- Release: Release all buttons and levers once the display screen restarts.
Step 3: Complete Shutdown and Restart
If the soft reset does not resolve the issue, you may need to perform a complete shutdown and restart:
- Turn Off the Scooter: Ensure the scooter is powered down completely as described in Step 1.
- Disconnect the Battery (If Necessary): In some cases, you might need to disconnect the battery to perform a complete restart. Refer to your user manual for specific instructions on how to safely disconnect the battery.
- Wait: Wait for a few minutes to ensure the system is fully reset.
- Reconnect the Battery: If you disconnected the battery, reconnect it securely.
- Power On: Press and hold the power button to turn the scooter back on. Wait for the startup sequence to complete.
How to Hard Reset Ather 450X
Press and hold Ather 450X ‘Rear Brake + Front Brake + Start Button’ – all together for Hard Reset.
Using the Ather App for Remote Restart
The Ather mobile app provides an alternative method to restart your scooter. Here’s how:
- Open the Ather App: Launch the app on your smartphone.
- Connect to the Scooter: Ensure your scooter is connected to the app via Bluetooth or Wi-Fi.
- Access Settings: Navigate to the settings menu within the app.
- Restart Option: Look for a restart or reset option and follow the on-screen instructions to remotely restart your scooter.
Post-Restart Checks
After restarting your Ather 450X, it’s important to perform a few checks to ensure everything is functioning correctly:
- Firmware Updates: Check for any pending firmware updates and install them if available.
- Connectivity: Ensure the scooter is connecting properly to your smartphone and other devices.
- Performance Test: Take your scooter for a short ride to verify its performance.
- Settings: Verify that all your personalized settings and preferences are intact.
Troubleshooting Common Issues
If you encounter any issues during the restart process, consider the following troubleshooting tips:
- Battery Issues: If the scooter doesn’t turn on after the restart, check the battery connections and ensure they are secure.
- App Connectivity: If you can’t connect to the scooter via the app, restart your smartphone and try again.
- Persistent Glitches: If issues persist after a restart, contact Ather customer support for further assistance.
Conclusion
Restarting your Ather 450X is a simple yet effective way to resolve various issues and maintain optimal performance. By following the steps outlined in this guide, you can ensure a smooth and successful restart process. Always remember to perform the restart in a safe environment and check for any updates or issues post-restart. Keeping your scooter’s software up-to-date and performing regular maintenance can help you enjoy a seamless riding experience with your Ather 450X.
With these comprehensive steps, you can confidently restart your Ather 450X and ensure it continues to deliver top-notch performance and reliability.
Also read: How to Reboot Ola S1 Pro?
FAQs
To restart your Ather 450X, turn off the scooter completely using the power button and wait 10–15 seconds. Press and hold both brake levers and the power button together for 5–7 seconds until the display restarts. This performs a soft reset and usually fixes minor software glitches.
A hard reset on the Ather 450X can be done by pressing and holding Rear Brake + Front Brake + Power/Start Button simultaneously for 10 seconds. The screen will reboot, and the scooter system will refresh. Use this only if the soft reset doesn’t work.
If your Ather 450X doesn’t turn on after a restart, check the battery connection, ensure it has enough charge, and confirm the emergency cut-off is not active. If the scooter still doesn’t respond, leave it off for a few minutes and try again or contact Ather customer support.
Yes. Open the Ather app → ensure your scooter is connected → go to Settings → choose Restart/Reset if available. The scooter will reboot remotely. This is helpful when the dashboard freezes but the scooter has active connectivity.
The Ather 450X may need a restart due to minor software glitches, frozen dashboard, Bluetooth issues, navigation problems, slow touchscreen response, or incomplete OTA firmware updates. Restarting refreshes the vehicle’s system and restores normal function.
A soft restart does not delete your data. Your ride stats, Bluetooth pairings, navigation settings, and preferences stay intact. A hard reset only refreshes the system software and does not erase user data.
Wait at least 10–15 seconds after turning off the scooter for a soft reboot. For a full system refresh or battery removal, waiting 2–5 minutes ensures the internal circuits discharge properly.
Battery disconnection should be done only if recommended by Ather support or mentioned in the manual. Incorrect handling may damage the battery connectors. Most issues are resolved through soft or hard resets without needing battery removal.
A restart helps clear temporary software bugs and optimizes system responsiveness. It improves touchscreen performance, smoothens navigation updates, and helps sensors recalibrate. It does not increase top speed or range but ensures smoother daily operation.
